The engraving machine should not be flustered

First check the material

Look at the material for impurities and whether the material is too hard. Broken knives can occur with impurities or hard materials.

The second is to check the machine

To see if the size of the machine is not suitable, and whether the machine is level, experience tells us that if the engraving machine is not leveled, it may cause a broken knife.

There is also testing the speed of the spindle motor

If the spindle motor speed is too low, the gear will increase the amount of the tool, so that the cutting force will become larger, which will cause the knife to be broken. Therefore, it is recommended that the spindle speed you use is slightly higher.

Finally, the processing technology of the engraving machine

It is necessary to check whether the reserved machining allowance of the engraving machine is reasonable, and whether the margin is stepped. If the machining allowance is not reasonable, then the engraving machine will vibrate when cutting, resulting in broken knife, so the engraving machine The processing technology also needs to be taken seriously.